Chatillon Gripping Fixtures
Chatillon offers 28 different types of quality gripping fixtures - you'll find just the fixture to meet your testing needs.
กก
Double Bollard Grips (GF-230)
With this grip the sample is held in a clamp and then taken around the two bollards. The stresses set up in the sample are then distributed around the circumferences of the two bollards. Use primarily on rope, flexible wire and cord. Maximum sample diameter is 0.25" (6 mm). Bollard diameter is 1.5" (38 mm). Capacity: 1000 lb (5 kN); Minimum load cell: 50 lb (220 N); Weight: 2.43 lb (1 kg); Length: 5.25" (135 mm)
5/32" Drill Chuck Pin Vise (GF-51)
กก
Stainless steel Jacobs chuck grips hold small cylindrical samples up to 5/32". Has 10-32 thread mounting. Capacity: 20 lb; Weight: 4 oz
1/4" Drill Chuck Pin Vise (GF-52)
Stainless steel Jacobs chuck grips hold small cylindrical samples up to 1/4". Has 10-32 thread mounting. Capacity: 20 lb; Weight: 4 oz
Miniature Tensile Vice Grips (GF-53)
Stainless steel vice grips with adjustable finger screw on each side. 10-32 thread mounting. Capacity: 20 lb; Depth: 0.5"; Width: 0.8"; Opening between faces: 0.2" Weight: 2 oz
Three-Point Bend Fixture (GF-54)
Comprehensive three-point bend allows uni-directional bending tests on rigid and semi rigid materials. Has span adjustment of 1" to 3" Accepts sample width up to 0.75". 10-32 thread mounting. Capacity: 50 lb; Height 0.5"; Weight (upper): 0.6 oz; Weight (lower): 3.6 oz.
กก
กก